Le Mans Aston Gas Cap Austin Healey MGB MGC Midget Alloy Flip ( Quick Release Lever) Cap is polished aluminum 3 inch diameter cap overall length including lever 4 1/8. The threaded portion of the cap is 2.5 inches with 16 TPI. We have also included a brass adapter ring which reduces the flange top 2 1/4 inches allowing installation to any of the following gas tubes. Austin Healey 100-6, 3000, MGB MGB-GT MGC & MGC-GT 1963-1968, early Mini, Sprite including Bugeye 1958-1968, MG Midget 61-68. Cap can also be adapted to MGA however additional work is required to modify the gas tube. Installation of the adapter ring with epoxy or solder. Tube must be removed from your vehicle when installing adapter ring if soldering. If unsure consult your mechanic for assistance. Vented cap
Important this is a polished alloy cap. We also offer chrome plated caps see alternate listing
Part No GC6510 (non emission models) Polished aluminum cap
- Austin Healey 100-6, 3000 57-67
- Austin Healey Sprite 58-68 (note the brass ring will need to be slightly relieved to press fit )
- MG Midget 61-68
- Lotus Elite Type 14
- Mini Cooper early models.
- MG Magnette MKIII MKIV
- Fiat (some early models)
- TVR Grantura MK2 & Griffith (some early models)
This cap will fit other early model sports cars. You need to check the flange where your existing cap mounts. The cap has a 2 1/2 inch opening threaded. With the adapter the opening can be reduced to 2 1/4. See our photos. The gas tube is from an Austin Healey 3000 MK3. The flange where the adapter ring is slightly less than 2 1/4. Using the brass adapter ring we have soldered the ring (or epoxy) to the top of the filler tube . This allows for the cap to be directly threaded on to the filler pipe. This tube size is fairly standard on British sports cars pre 1969. Please remove your existing cap an measure prior to ordering to insure this cap will adapt to your vehicle.