Austin Healey 100-6 3000 Trunk Lid Rubber Seal OE

Rare Austin Healey 100-6 3000 Trunk Lid Rubber Seal. Will fit all 6 cylinder models 1957 thru 1967 Austin Healey models. The only seal with curved corners which is original to the vehicle All other seals are supplied straight. Soft foam rubber with skin.

Note: this part is to be installed inside trunk lid lip not on rear shroud. We recommend using 3M adhesive clear automotive or crazy Glue.

Correct fitting Austin Healey 3000 MK3 lower windshield seal, yes our part fit! This is a Sports and Classics exclusive. No additional stock once depleted.

Reference number 14B7466

1957-1967

You will probably need to remove trunk lid to insatall this part. It will require locktite gel to install. This is not a 15 minute job. You will need to install one corner and stretch the seal to a second corner after the first corner has set at least one full day. Repeat the process over several days, Our young tech installed the seal as stated and is extremely talented.

We would recommend a professional with patience to do this process if there are any still out there. Note picture of red trunk lid with seal installed using process we recommend otherwise you will probably fail