Lucas Fog & Driving Lamp Stone Guard 7 ” Vintage. Limited stock. Rare vintage style Fog Lamp Stone guard bracket mount with mesh stone guard. Polished stainless chrome bracket assembly is double adjustable. The flat mounting bracket is slotted allowing in and out movement to locate the mesh stone guard close or farther from the lamp lens. The bracket is also adjustable in height allowing up and down movement for proper centering of the round stone guard. This is a double adjustable bracket and includes the round stone guard which will fit all Lucas SFT700 and SLR700 lamps. In addition this unit can also be fitted to other stem mounted Lucas driving and fog lamps which have 7 lens. We have only fitted these to Lucas lamps but they may also fit vintage 7″ round driving and fog lamps.
Important these vintage style driving / fog lamp brackets are mounted below and forward of the lamp. Make sure you have space available. If you are installing for example to a lamp which is mounted on a splash pan it may be necessary to use a spacer to clear the front bumper. If you are mounting to a lamp bar or badge bar you should have adequate space. Depending on the location the bracket tube can be mounted up or down depending on the lamp application. We found that on the initial pair of brackets we obtained that the tube worked best with the adjusting tube in the downward position on the SFT700 lamp see the display picture. However this may be different on other lamps
Stock is extremely limited to a total of 8 units which will arrive late April. These are offered on first come pre sale basis.
All sports cars with 7 ” driving and fog lamps with stem mounting. Austin Healey, Jaguar,Lotus, Morgan, MG, Rover,Triumph and non British vehicles.
Fits Lucas lamps
- SLR700 Driving Lamp
- SFT700 Fog Lamp
If you are ordering these for a non Lucas lamp please note the following to make sure these will fit your vehicle. Flat base plate is 4 1/2 inches, The slot is 1 1/4 long and 5/8 diameter. The forward tube extends 1 inch down or up depending on your mounting. The center floating tube is approximately 2 inches long not including the securing nut. Floating tube allows the adjustment of the stone guard up or down and is secured in a fixed position with an allen hex nut or bolt.
Price Listed is Each
Part Number reference BKT-HSG1070