Formula Speedwell Steering Wheel Hub No 4 MG Midget Sprite Ginetta Marco. Important this is a NOS Formula Speedwell Prestige Marque steerin wheel boss. You can only fit specifice wheels to these hubs usually under the name Formula. The hub has 36 splines and a 9/16 steering shaft. It is non functioning horn just the Formula Checker Flag pattern.
The casting has C4 which does not stand for Corvette. There is a plastic case trim around the hub decrative. Mounting screws are included to mount the steering wheel. Below we have listed the British sportscars with the correct splines and shaft. So double check prior to ordering
Stock No SWH4
- The Sizing: During these specific years, British Leyland briefly utilized a 9/16″ mounting thread and tight spline configuration.
- The Horn Setup: The 1968 and 1969 MG Midget MkIII and Austin-Healey Sprite MkIV famously moved the horn button directly to the tip of the turn signal indicator stalk. Because there were no wires running through the center of the wheel, the Formula Speedwell boss used the solid “flag logo” center badge as a non-functioning cosmetic cover
- The Sizing: While standard road-going Minis favored a 5/8″ column, high-end period tuning houses like Speedwell machined high-strength hubs to 9/16″ for select competition columns.
- The Horn Setup: Early Mk1 and Mk2 Minis did not feature center horn pushes on aftermarket sport setups; their horn controls were operated either via a stalk or a dashboard toggle switch.


Reviews
There are no reviews yet.